Condition – Hardly used – Opened and verified functionality and applied IP address. Shutdown and never used after that.
*Shipping to the lower 48 only! Thank you!
EX2200 Line of Ethernet Switches
The Juniper Networks EX2200 line of Ethernet switches deliver an economical standalone solution for access layer deployments in branch offices and low-density campus networks, satisfying the connectivity requirements of today’s high-performance businesses. Occupying a single rack unit, the EX2200 provides a compact solution for crowded wiring closets and access locations where space and power are at a premium.
Four EX2200 switch models are available, offering 24 and 48 10/100/1000BASE-T ports with or without Power over Ethernet (PoE). The PoE-enabled models deliver 15.4 watts of standards-based 802.3af Class 3 PoE on all ports for supporting networked devices such as telephones, video cameras, and wireless LAN (WLAN) access points in converged networks. Support for the IEEE 802.3at PoE+ standard means the EX2200 offers additional power for devices such as multiple radio IEEE 802.11n wireless access points that may require more than 15.4 watts.
Four fixed front panel Gigabit Ethernet (GbE) uplink ports on the EX2200 support highspeed backbone or link aggregation connections between wiring closets and upstream aggregation switches without sacrificing base ports, offering true 24+4 and 48+4 configuration options. And support for Layer 2 and basic Layer 3 protocols such as RIP and static routing in the base license delivers a level of functionality typically associated with higher cost solutions.
Highly Available, Environmentally Friendly Solution
The EX2200 switch’s 10-inch depth, low power consumption and low-acoustic fans make it an environmentally friendly solution that is ideal for open office deployments. To avoid the complexities of the Spanning Tree Protocol without sacrificing network resiliency, the EX2200 employs Redundant Trunk Group (RTG) to provide the necessary port redundancy while simplifying switch configuration. The EX2200 also supports an optional redundant power supply (RPS), ensuring power resiliency and uncompromised availability.
(W x H x D) 17.4 x 1.7 x 10 in
(44.1 x 4.3 x 25.4 cm)
1 rack unit
42 Mpps (wire speed)
77 Mpps (wire speed)
10/100/1000BASE-T Port Densities
24 / 48 per platform
100BASE-FX / 1000BASE-X (SFP) Port Densities
4 per switch (fixed ports, SFP required)
10GBASE-X Port Densities
Integral power supply and fans
· 24T and 48T (non-PoE): Autosensing; 100-120 V / 200-240 V; AC 100 W
· 24P and 48P (PoE): Autosensing; 100-120 V / 200-240 V; AC 550
QoS Queues / Port
IPv4 Unicast / Multicast Routes
6,500 / 0
Number of VLANs
Limited lifetime switch hardware warranty
|Наименование товара -
||Juniper EX2200-48P-4G **NEW / SEALED *Townsend Networks*
|Код по каталогу -
|Цена по нашему прайс-листу -
|Цена прописью -
||Две тысячи пятьсот рублей 00 копеек
Juniper Networks Secure Services Gateway SSG 20 - Security appliance - SSG-20-SH
Juniper Networks (SSG-5-SH) 256MB Security Services Gateway 5 with RS232 Seri...